西美爾氣動蝶閥

• A1  指示器   NAMUR標準指示器便于安裝位置開關，定位器等附件。

  A2  輸出軸   鍍鎳合金鋼、高精密一體式輸出軸同時符合NAMUR、ISO5211、DIN3337標準?？筛鶕?jù)客戶要求定制尺寸和不銹鋼板材料。

  A3  密封   在常溫工作條件下使用丁腈橡膠，在高溫或低溫時采用氟橡膠或硅橡膠。

  A4  缸體   ASTM6005壓鑄鋁合金缸體可以采用硬質氧化、環氧樹脂噴涂（根據要求噴涂蘭色、棕色、黃色）、PTFE涂層或鍍鎳滿足不同要求。

  A5  行程調節  兩個獨立的行程調節螺釘可以進行方便、精確±5°的調節 開、關位置。

  A6  活塞   雙活塞齒條、采用鑄鋁硬質氧化或者鑄鋼鍍鋅處理，安裝位置對稱、運作迅速、使用壽命長，簡單的顛倒活塞可以改變旋轉方向。

  A7  高性能彈簧   采用優質材料、涂層處理，預壓裝配。具有較強的抗腐蝕性和使用壽命。能夠安全、簡單的拆卸單作用執行器，通過改變彈簧數量滿足不同的力矩輸出范圍。

  A8  缸蓋   壓鑄鋁合金表面金屬粉末噴涂各種顏色、PFTE涂層或鍍鎳處理。

  A1 Indicator 

  Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box, Positioner and so on.

  A2 Pinion

  The pinion is high-precision and integrative, made from nickelled-alloy steel, full conform to the lastest standards of ISO5211,DIN3337, NAMUR. The dimensions can be customized and the stainless steel is available.

  A3 O-rings 

  NBR rubber O-rings provide trouble-free operation at standard temperature range. For high and low temperature applications Viton or Silicone.

  A4 Body 

  According to the different requirements, the extruded aluminum alloy ASTM6005 Body can treated with hard anodized, power polyester painted (different colours is available such as blue, orange, yellow etc.), PTFE or Nickel plated.

  A5 Travel adjustment 

  The two independent external travel stop adjustment bolts can adjust±5°at both open and close directions easily and precisely.

  A6 Pistons

  The twin rack pistons are made from Die-Casting aluminum treated with Hard anodized or made from cast steel with galvanization. Symmetric mounting position. Long cycle life and fast operation, reversing rotation by simply inverting the pistons.

  A7 High performance springs 

  Preloaded coating springs are made from the high quality material for resistant to corrosion and longer service life, which can be demounted safely and conveniently to satisfy different requirements of torque by changing quantity of springs.

  A8 End caps 

  Die-casting aluminum powder polyester painted in different colours, PTFE or Nickel plated

   

  
  

  V1 閥桿   

  ◆兩段閥桿設計，閥桿處于"懸浮"狀態。

  ◆剛性閥桿，安全可靠。

  ◆閥桿與閥板間隙小。

  V2 閥座  

  ◆能在真空環境中使用。

  ◆耐磨和密封性能良好。

  ◆環形筋條設計，密封性能良好。

  ◆曲線型襯膠材料，確保閥座和閥桿之間密封性能良好。

  ◆電木填料，密封可靠。

  V3 閥體  

  ◆環形凸面，密封型可靠。

  ◆便于安裝的定位孔設計。

  ◆便于安裝的標準法蘭。

  ◆設計和測試按API-598及MISS－SP－67標準。

  V4 軸套與密封圈   

  ◆石墨填充，永久性潤滑，聚四氟乙烯軸套，可減小摩擦和閥桿單面負荷。

  ◆三層密封將外漏可能性降到最低限度。

  ◆上下采用防塵密封。

  V4 軸套與密封圈   

  ◆石墨填充，永久性潤滑，聚四氟乙烯軸套，可減小摩擦和閥桿單面負荷。

  ◆三層密封將外漏可能性降到最低限度。

  ◆上下采用防塵密封。

  V5 閥板   

  ◆閥板周邊經加工后，與閥座之間磨損小，且密封性能良好。

  ◆曲面設計保證其最大流量。

  ◆"懸浮閥板"設計，實現同軸密封并減小閥座磨損。

  V1 Stem

  ◆Two-piece stem design allows disc to " float".

  ◆Positive stem retention for safety.

  ◆Low tolerance stem-disc connection for control of disc position.

  V2 Sleeve

  ◆Cartridge sleeve design for extended service and ease of replacement. Can be used for vacuum service.

  ◆Seating area designed for low friction, tight seal.

  ◆Elastomer molded for primary stem sealing.

  V3   Body

  ◆Extended neck for insulation clearance.

  ◆Locating holes on wafer body for easy installation.

  ◆Standardized mounting flange for manual or actuated operators.

  ◆Meets API-609and MISS-SP-67 specifications for design and testing.

  V4 Bearings &Seals

  ◆Permanently-lubricated nylatron stem bearing for low friction and side-load support.

  ◆Triple seal reduces possibility of external leakage.

  ◆Upper and lower dirt seals.

  V5 Bearings & Seals

  ◆Disc edge machined for low friction tight seal and reduced sleeve wear.

  ◆Streamlined profile for maximum flow.

  ◆"Floating Disc" design for concentric sealing and reduced sleeve wear.
  

  西摩爾中線蝶閥根據最新版的美國閥門和管件制造廠標準化協會MSS SP-67標準和美國石油協會APl-609標準及國際標準化組織IS07005標準進行設計制造，按照IS0900l：2000質量體系標準進行過程控制管理，并按照API-598標準進行流體靜力、氣體力和整體運作的全數檢驗，因而能保證每一只蝶閥的零泄漏和高品質。
  本公司能同時提供規格在DN50~600(2"-24")，工作壓力在PN1.0-1.6Mpa之間的任一款蝶閥產品，而且由于采用了如歐洲體系、美洲體系等標準體系設計制造的方案，因此，SEYMOUR蝶閥能夠適用于：
  1、ISO7005-1992，PN1.0～1.6Mpa的管路法蘭系統。
  2、ASME/ANSI B16.5-1996、CLl25級、CLl50級的管路法蘭系統。
  3、JIS B2211～2213-1996、PN 0.5~1.6Mpa(5K、10K、16K)的管路法蘭連接系統。
  4、GB/T9113-2000、PN 1.O～1.6Mpa的管路法蘭連接系統。

  SEYMOUR central line Butterfly valve is produced according to the latest standard Mss SP-67 and API-609 of USA and ISO7005.The production process is managed under the guidance of ISO9001(2000version). The valves are completely and fully tasted follow API-598,fluid static force, gas force and overall performance of valve are completely and fully carried out following standard of API-598.Thus the zero leakage and high quality are ensured.
  We are capable of supplying butterfly valves with size ranges from DN50-DN600,pressure from PN1.0-1.6.In the meanwhile, we also adopt European and American design standard for different requirements. SEYMOUR butterfly valves would be applied to:
  1.Pipeline flange system of lSO 9005-1992, PN1.0-PN 1.6.
  2.Pipeline flange system of ASME / ANSI B16.5-1996, CL125 class, CL150 class. 
  3.Pipeline flange system of JISB2211-2213-1996 and PN 0.5-1.6 (5D, 10K, 16K)
  4.Pipeline flange system of GB/T 9113-2000 and PN 1.0-1.6

  
  SEYMOUR蝶閥驅動裝置的連接尺寸按IS05211標準、美國國家標準或者按顧客的要求進行生產。
  如果您選擇了BWAY閥門，您就得到了操作簡單、安全可靠，極低損耗，很小扭矩，更小尺寸，更輕質量，容易維護的產品。

  The connection dimension of actuators for the SEYMOUR butterfly valve could be made per ISO5211 and American National Standard or customized.
  once you choose SEYMOUR valves, you will be rewarded with simple operation , reliability, low abrasion, small torque, lighter weight. The valves could be easily equipped with pneumatic and electronic actuators according to different requirements.

  主要特點：
  1、MSS SP－67和API609標準生產。
  2、額定壓強(1.0Mpa、1.6Mpa)下緊密密封，零泄漏量。
  3、先進的多重密封結構，避免閥體接觸介質，做到整閥零外漏。
  4、閥座密封面的科學設計，使閥座能與閥體管道法蘭緊密結合，無需其它配件。
  5、先進的蝶閥形狀和配合，保證整閥密封性能更高，扭矩更低、流量更大、流阻更小，雙向使用。
  6、多標準體系設計制造，適用多種連接法蘭，互換性高。
  7、所有部件都經過防腐處理，適用于各種復雜的工作環境。

  Key features of SEYMOUR butterfly valves
  ⑴  Manufactured per MSS SP-67 and API609.
  ⑵  Tight sealing and Zero leakage under rated pressure (1.0Mpa and 1.6Mpa).
  ⑶  Advanced multi-sealing design to free valve body from direct contact with working media and to ensure Zero leakage.
  ⑷ Scientific design for the sealing surface of Valve seat to make a tight connection between the seat and Valve body, between the seat and flange without any additional accessories.
  ⑸  Advanced valve shape and mounting pattern design to ensure a better sealing, small torque, bigger flow and lower fluid resistance as flexible two-side connection.
  ⑹  Designed and produced based on multi-standard system so the valve could be applied to flanges of various type, thus the valve enjoys excellent interchangability.
  ⑺  Because all the parts are undergone preservative treatment, the valve could be applied to Hard environment.

  主要應用：
  SEYMOUR襯膠蝶閥是一種結構簡單，易于操作，使用壽命長且重量輕的控制閥，適用于開關和調節的場合。適用于化工，醫藥，，造紙，水處理等行業中氣體，液體，漿料，固體粉末等流體的控制。

  General:
  Wafer type rubber seated butterfly valves has been developed as a result of making great efforts to offer a fully function, easy handling, long life and cost effective performance. It features a simple and compact structure, and extremely light-weight body. It enable to make control, also enable to shut off. It can be used for gas ,liquid ,oar, power,  and granule fluids in chemical, food, pharmaceutical, paper and pulp, water processing industries and so on.

   

  西 美 爾自 動 控 制 閥 選 型 規 格 表 Seymour Control Valves Specification				客 戶 CUSTOMER	西美爾控制系統（昆山）有限公司
  				設計單位 DESIGNING DEPARTMENT
  				工程名稱 PROJECT NAME
  				合同號 ConTRACT NUMBER
  				日 期 DATE
  序號 NUMBER			執行機構 ACTUATOR	類 型 TYPE	RACK&PINION
  位號 TAG NO.				型號規格 MODEL	RT020-RT2700
  型號 MODEL				行程／轉身 TRAVELLING	0-90°
  數量 QUANTITY				氣源 AIR/POWER SUPPLY	0．2—0．8Mpa
  口徑 CALIBER		2"-24" (DN50-DN600)		作用方式 ACTION	DOUBLE ACTING
  閥 門 VALVES	類 型 TYPE	中線		輸出扭矩 OUTPUT TORQUE	SPRING RETURN
  	公稱壓力 PRESSURE	1.0-1.6MPa		防護等級 PROTECTION	見SEYMOUR 扭力表
  	連接方式 ConNECTION	對夾式		彈簧范圍 SPRING RANGE	READ AER0 2 S OUTPUT
  	閥體材質 BODY MATERIAL	見材料明細表 READ THE VALVE ASSEMBLY ANNEX	定位器 POSITIONER	類 型 TYPE	電氣、氣氣
  	閥板材質 INNER MATERIAL				E-P、E-E POSTIonER
  	閥座材質 SEAT MATERIAL			輸入信號 INPUT SIGNAL	4-20mA 0.2-1Kgf/cm 2
  				氣源 AIR SUPPLY	1.4-7KqFcm 2
  	閥芯材質 PLUG MATERIAL			反饋信號 FEEDBACK SIGNAL	4-20mA
  	流量特型 FLOW			防爆等級 EXP.CLASS	ExdBT6、ExdCT6
  	泄露等級 LEAKAGE CLASS			防護等級 PROTECTION
  電磁閥 SOLENOID  VALVE	型號 MODEL		限位開關 SWITCH	型 號 MODEL
  	換向時間 TIME	0.05SEC		電 壓 VOLTAGE	MAX 125VDC 250VAC
  	接管螺紋 THREAD	1／4"G		電 流 ELECTRICTY
  	工作介質 FLUID			防爆等級 EXP.CLASS	ExdBT6、 ExdCT6
  	壓力范圍 PERSSURE	2-8Kf／Cm 2	氣源處理 AIR-SET	減壓閥 PRESSURE REDUCING
  	溫度范圍 TEMPERATURE	5～60℃	離合器 Clutch	手輪機構 HANDWHEEL	XLHJ系列XLHJ SERIES
  	電源要求 POWER	24VDC 110VAC 220VAC
  	功率消耗 ConSUMPTION		其他 OTHERS	增速器、氣控閥、鎖止閥、調速器、閥位變送器…  Booster relay、 Air-valve、 Lock-valve、 Speed-controller、 Position transmitter…
  	防護等級 PROTECTION	IP67、IP65…
  	防爆等級 EXP.CLASS	ExmIIT4、ExmIIT5、ExdIIBT4、ExiaT6…
  說明 EXPLATION	工作介質 FLUID		動力黏度 VISCOSITY		壓縮系數 COMPRESS
  	使用溫度 OP DENSITY		閥關閉差壓 SHUT-OFF DIFF. PRESSURE		臨界壓力 CRITICAL PRESS

閥座材質選用參照表：

Cv值 Valve Sizing Coefficients ( US-gpm @ 1△P )