進口微型隔膜泵(歐美進口品牌)

英國GRIMM格林進口微型隔膜泵 UK GRIMM imported micro diaphragm pump

英國格林GRIMM進口微型隔膜泵概述：

             進口微型隔膜泵是用微型直流電動機(電壓為12V、24V的電動機)做動力驅動裝置，驅動內部機械偏心裝置做偏心運動，由偏心運動帶動內部的隔膜做往復運動。從而對固定容積的泵腔內的空氣進行壓縮(壓縮時抽氣口關閉，排氣口打開形成微正壓)、拉伸(壓縮時排氣口關閉，抽氣口打開形成負壓)，在泵抽氣口處與外界大氣壓產生壓力差，在壓力差的作用下，將氣體壓(吸)入泵腔，再從排氣口排出。

         進口微型隔膜泵指的就是微型真空泵，指具備一進一出的抽氣嘴、排氣嘴各一個，內部通過機械裝置使泵內部的隔膜做往復式運動，并且在進口處能夠持續形成真空或負壓，排氣嘴處形成微正壓；工作介質主要為氣體，體積小巧的一種儀器。

英國格林GRIMM進口微型隔膜泵特點:

1、移動和安裝方便。

2、具有自吸功能。

3、內裝壓力自動開控制泵。

4、介質溫度可高達60℃。

5、噪音低、耐腐蝕、壓力高。

英國格林GRIMM進口微型隔膜泵工作原理：

第一種工作模式：

          電機的圓周運動，通過機械裝置使泵內部的隔膜做往復式運動，從而壓縮、拉伸泵腔內的空氣形成負壓，在抽氣口處與外界大氣壓產生壓力差，在壓力差的作用下，將氣體吸入泵腔，再從排氣口排出。

第二種工作模式：

          進口微型隔膜泵是利用螺桿的回轉來吸排液體的。進口微型隔膜泵中間螺桿為主動螺桿，由原動機帶動回轉，兩邊的螺桿為從動螺桿，隨主動螺桿作反向旋轉。主、從動螺桿的螺紋均為雙頭螺紋。由于各螺桿的相互嚙合以及螺桿與襯筒內壁的緊密配合，在進口微型隔膜泵的吸入口和排出口之間，就會被分隔成一個或多個密封空間。隨著螺桿的轉動和嚙合，這些密封空間在泵的吸入端不斷形成，將吸入室中的液體封入其中，并自吸入室沿螺桿軸向連續地推移至排出端，將封閉在各空間中的液體不斷排出，猶如一螺母在螺紋回轉時被不斷向前推進的情形那樣，這就是進口微型隔膜泵的基本工作原理。

英國格林GRIMM進口微型隔膜泵技術參數：

最大流量：1-12L/min

吸       程：5m

口       徑：3/8″

轉       速：375-1300r/min

輸入功率：10-40w

最高壓力：0.24-0.9Mpa

最大電流：1-7A

電       壓：12/24VDC

調壓開關：0.24-0.86MPa

泵體材質：FRPP

膜片材質：三元乙丙塑膠、丁晴橡膠(耐油)

英國格林GRIMM進口微型隔膜泵用途：

             反滲透水質凈化系統、過濾機、噴霧裝置、工業設備、化工計量加液、衛生、環保。

UK GRIMM imported micro diaphragm pump summary:

           imported miniature diaphragm pump with DC micro motor (motor voltage 12V, 24V) as the power driving device, driving device of internal mechanical eccentric eccentric motion, the eccentric motion driven by internal diaphragm reciprocating motion. Thus the pump cavity of fixed volume of air compressed (compressed air exhaust port to open closed, the formation of micro positive pressure, tensile (compression) when the exhaust port closed, open air pump, negative pressure) in the inlet and outside atmospheric pressure difference generated under the action of the pressure difference of gas pressure (suction) into the pump chamber and then discharged from the exhaust port.

         imported micro diaphragm pump refers to the micro vacuum pump, which has one out of the suction nozzle and an exhaust nozzle of a mechanical device, through to diaphragm inside the pump to do reciprocating motion, and can continue to form a vacuum or negative pressure in the inlet, the formation of micro positive pressure exhaust nozzle; the working medium is mainly gas, an instrument of small volume.

UK GRIMM imported micro diaphragm pump characteristic:

1.Easy to move and install.

2.With self suction function.

3.Built-in pressure automatic opening control pump.

4.Medium temperature can be as high as 60 degrees.

5.Low noise, corrosion resistance, high pressure.

UK GRIMM imported micro diaphragm pump working principle:

The first working model:

         The circular motion of the motor, the mechanical device makes the diaphragm inside the pump to do reciprocating motion, thereby compressing and stretching the pump chamber in the air to form the negative pressure, exhaust mouth and outside atmospheric pressure difference generated under the action of the pressure difference of gas suction pump cavity, then discharged from the exhaust port.

Second modes of work:

         imported micro diaphragm pump is to use the rotation of the screw to suck and drain liquid. imports of micro diaphragm pump, the middle screw for the active screw, driven by the prime mover rotation, the two sides of the screw driven screw, with the active screw in reverse rotation. The threads of the main and driven screws are double headed threads. Because of the mutual engagement of the screws and the close cooperation between the screw and the lining of the lining barrel, the inlet and the outlet of the micro diaphragm pump are separated into one or more sealing spaces. With the screw rotation and meshing, the sealed space in the pump suction side evolving, the suction chamber of liquid filled therein, and a suction chamber along the screw axis continuous passage to the discharge end, will be closed in the space of continuous discharge of liquid, like a nut in screw rotation is constantly advancing so, this is the basic principle of imported micro diaphragm pump.

UK GRIMM imported micro diaphragm pump technical parameter:

Maximum flow: 1-12L/min

Range of suction: 5m

Caliber: 3/8 "

Speed: 375-1300r/min

Input power: 10-40W

Maximum pressure: 0.24-0.9Mpa

Maximum current: 1-7A

Voltage: 12/24VDC

Voltage regulator: 0.24-0.86MPa

Pump body material: FRPP

Diaphragm material: three yuan ethylene propylene rubber, NBR rubber (oil resistant)

UK GRIMM imported micro diaphragm pump purpose:

          Reverse osmosis water purification system, filter, spray equipment, industrial equipment, chemical metering, liquid, sanitation, environmental protection.